The tracert command is a Command Prompt command that’s used to show several details about the path that a packet takes from the computer or device you’re on to whatever destination you specify.
You might also sometimes see the tracert command referred to as the trace route command or traceroute command.
Tracert Command Availability
The tracert command is available from within the Command Prompt in all Windows operating systems including Windows 11, Windows 10, Windows 8, Windows 7, Windows Vista, Windows XP, and older versions of Windows as well.
Tracert, as it’s explained below, applies to Windows only, but the traceroute command is available for Linux, too.
Tracert Command Syntax
If you know how to read command syntax, the syntax for tracert is pretty straight-forward:
The availability of certain tracert command switches and other tracert command syntax may differ from operating system to operating system.
tracert [-d] [-h MaxHops] [-w TimeOut] [-4] [-6] target [/?]
Other less commonly used options for the tracert command also exist, including [-j HostList], [-R], and [-S SourceAddress]. Use the help switch with the tracert command for more information on these options.
Tracert Command Examples
tracert 192.168.1.1
In the above example, the tracert command is used to show the path from the networked computer on which the tracert command is being executed by a network device, in this case, a router on a local network, that’s assigned the 192.168.1.1 IP address.
Save the lengthy results of a tracert command by redirecting the command output to a file with a redirection operator.
The result displayed on the screen will look something like this:
Tracing route to 192.168.1.1 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.1.254 2 <1 ms <1 ms <1 ms 192.168.1.1 Trace complete.
In this example, you can see that tracert found a network device using the IP address of 192.168.1.254, let’s say a network switch, followed by the destination, 192.168.1.1, the router.
tracert www.google.com
With the tracert command shown above, we’re asking tracert to show us the path from the local computer all the way to the network device with the hostname www.google.com.
Tracing route to www.l.google.com [209.85.225.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 10.1.0.1 2 35 ms 19 ms 29 ms 98.245.140.1 3 11 ms 27 ms 9 ms te-0-3.dnv.comcast.net [68.85.105.201] … 13 81 ms 76 ms 75 ms 209.85.241.37 14 84 ms 91 ms 87 ms 209.85.248.102 15 76 ms 112 ms 76 ms iy-f104.1e100.net [209.85.225.104] Trace complete.
In this example, we can see that tracert identified fifteen network devices including our router at 10.1.0.1 and all the way through to the target of www.google.com, which we now know uses the public IP address of 209.85.225.104, one of Google’s many IP addresses.
tracert -d www.yahoo.com
With this tracert command example, we’re again requesting the path to a website, this time www.yahoo.com, but now we’re preventing tracert from resolving hostnames by using the -d option.
Hops 4 through 12 were excluded above just to keep the example simple. If you were executing a real tracert, those results would all show up on screen.
Tracing route to any-fp.wa1.b.yahoo.com [209.191.122.70] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 10.1.0.1 2 29 ms 23 ms 20 ms 98.245.140.1 3 9 ms 16 ms 14 ms 68.85.105.201 … 13 98 ms 77 ms 79 ms 209.191.78.131 14 80 ms 88 ms 89 ms 68.142.193.11 15 77 ms 79 ms 78 ms 209.191.122.70 Trace complete.
We can see that tracert again identified fifteen network devices including our router at 10.1.0.1 and all the way through to the target of www.yahoo.com, which we can assume uses the public IP address of 209.191.122.70.
As you can see, tracert didn’t resolve any hostnames this time, which significantly sped up the process.
tracert -h 3 lifewire.com > z:\tracertresults.txt
In this last example of the tracert command in Windows, we’re using -h to limit the hop count to 3, but instead of displaying the results in Command Prompt, we’ll use the > redirection operator to send it all to a TXT file located on Z:, an external hard drive.
Here are some example results of this last command:
Tracing route to lifewire.com [151.101.66.114] over a maximum of 3 hops: 1 <1 ms <1 ms <1 ms testwifi.here [192.168.86.1] 2 1 ms 1 ms <1 ms 192.168.1.1 3 17 ms 16 ms 17 ms giantwls-64-71-222-1.giantcomm.net [64.71.222.1] Trace complete.
Tracert Related Commands
The tracert command is often used with other networking related Command Prompt commands like ping, ipconfig, netstat, nslookup, and others.
The pathping command is similar to tracert but also shows network latency and loss information.
Get the Latest Tech News Delivered Every Day
How to Use the Netstat Command
How to Use the Netstat Command on Mac
Net Send Command
How to Solve a Destination Host Unreachable Error
How to Redirect Command Output to a File
What Are Hops & Hop Counts?
How to Use the Ping Command in Windows
Copy Command
Vol Command Examples and Options
Net Command
How to Set Up and Use Wake-on-LAN
How to Resolve Limited or No Connectivity Errors in Windows
What Is DNS (Domain Name System)?
Cisco SG300-28 Default Password
What Is an IP Address?
How to Use the Net Use Command in Windows
Facebook
Twitter
Hit Refresh on Your Tech News
About Us
Privacy Policy
Editorial Guidelines
Terms of Use
Careers
Advertise
Contact
EU Privacy
NEWS
HOW TO
FEATURES
ABOUT US
